Chemical composition:
Monol initiated propylene oxide/ethylene oxide copolymer
Product characteristics
Properties | |||
Physical form | Colorless to slightly yellow liquid | ||
Physical data | Characteristic | Unit | HY108 |
Viscosity (ASTM D445) at 40 °C at 100 °C | mm2/s | 1000 163 | |
Viscosity index (ASTM D2270) | 281 | ||
Water content (ASTM E203) | % | < 0.25 | |
Density, 20 °C (ASTM D1298) | g/cm3 | 1.060 | |
Flash point coc (ASTM D92) | °C | 230 | |
Pour point (ASTM D97) | °C | – 36 | |
Ash content (ASTM D482) | % | < 0.01 | |
Refractive index, 20 °C | 1.46 | ||
Surface tension, 20 °C | mN/m | 35 – 40 | |
Vapor pressure, 20 °C | mmHg | < 0.001 | |
Specific heat capacity | kJ/kg | 1.95 | |
Equilibrium water content at 65 % relative humidity, 21 – 28 °C | 1.5 – 2.5 | ||
Quality control | The above-listed data represent average values at the time of going to press of this Technical Information. They are intended as a guide to facilitate han- dling and cannot be regarded as specified data. Specified product data are issued as a separate product specification . | ||
Seal compatibility | The elastomer performance of HY108 with various seal types is shown below. | ||
Test conditions: 120 hours at 70 °C | |||
Elastomer | Linear swell(%) | Change of hardness | |
Natural rubber | 3 | 3 | |
Styrene butadiene (SBR) | -0.8 | 2 | |
Nitrile butadiene (NBR) | -0.8 | 1 | |
Isobutene isoprene (IIR) 1 | 0 | 2 | |
Isobutene isoprene (IIR) 2 | -1.5 | 4 | |
Chloroprene (CR) | 0 | -1 | |
Silicone (Q) | 0 | -1 |
Applications
HY108 is a high performance water soluble polyalkylene glycol basestock with a viscosity of 1000 mm2/s at 40 °C. HY108 finds extensive application when manufacturing and formulating various water soluble lubricants for example:
• Gear, bearing and calender lubricants
• Compressor lubricants
• Metal working fluids
Storage
• HY108 should be kept in a dry place in its tightly sealed original packaging. Storerooms must not be overheated.
• HY108 is hygroscopic with the result of absorbing moisture very quickly. Care needs to be taken to exclude moisture. Drums must be resealed each time they are opened.
• HY108 must be blanketed with nitrogen if stored in heated tanks (at < 60 °C) to prevent from coming into contact with air. Constant, gentle stirring helps to prevent discoloration as a result of prolonged contact with electrical elements or external heating coils.
Shelf-life Provided:it is stored properly and the drums are kept tightly sealed, HY108 has a shelf-life of 5 years in its original packaging.
INQUIRE NOW