RHOCUT MEP10/22
Based on high -quality mineral oils with a high viscosity index; Oil processing for deep holes with excellent characteristics of low viscosity.
The product is suitable for high -speed single blades with a large presentation. Thanks to the action of several additives, they have good cutting properties; High surface purity and a significant increase in the life of the tool
Product characteristics
The main physicos - chemical properties:
Test method | MEP10 | MEP22 | |
﹫ 20 ℃ kg/l Density | DIN 51757 | 0.85 | 0.88 |
﹫ 40 ℃ CST Viscosity | DIN 51562 | 12 | 18 |
Flash point (closed) | DIN 51376 | 170 | 180 |
Corrosion of a copper leaf | ASTM D 130 | 1b | 2c |
▪ processing of wells from non -ferrous metals and steel for general purposes
▪ Suitable for processing complex materials, such as alloy steel, stainless steel, high -strength nickel alloy, high -strength ferrous metals with high hardness, steel and titanium alloys
Functions
▪ Good cutting properties, slight wear of the tool due to preventing the formation of a built-up edge,, the cleanliness of the surface of the part can be improved.
▪ When using the Rhocut Mep10 / 22, you can get a bright and exact hole even with unsatisfied operating temperature.
▪ Because of low viscosity of the oil, so rapid cooling, strip removal smoothly.
▪ No smell, without irritating the effect on the skin. Unique fog additives can avoid the formation of oil fog.
▪ The holes are especially suitable for one -row, but can also be used for other types of deep holes processing.
Applications
Widely used for processing various types of steel. Removing per unit of cutting force 600 - 900 N / mm2 gives the best results.
INQUIRE NOW
